Best Air Compressors Under $1,000

Share on:
Best Air Compressors Under $1000

Are you on a budget and looking for a more professional air compressor under $1000 to purchase?  You’re in the right place. Keep reading for the reviews of the best air compressors under $1000.

Through the use of electricity, diesel or gas, air compressors convert electric power into pressurized air. 

Air compressors from different companies vary in size, performance and features. If you’re looking for a good air compressor under $1000 for either commercial or home use, the following review will be of great help.

  1. Industrial Air Contractor 4 Gallon:

This is a machine which does not use any oil and has a direct drive pump which makes maintenance easy.

 It is lightweight and portable and comes with a 4-gallon twin tank and runs on a 5HP Honda OHC/OHV engine. 

The engine runs very smoothly and has a low emission rate. 

The industrial air contractor uses a patented technology to cool the unit. 

This patented technology is made up of a two-part cooling system which keeps the unit cool and makes sure the temperature does not go up when in use. 

This means that you can run the unit on a high RPM but it won’t get damaged from being too hot. 

It has a duty cycle of 80% and a maximum pressure of 155 PSI. The pump of this unit can maintain pressure of up to 90 PSI at 50 CFM on multiple main guns simultaneously. 

This is the ideal unit you need for a variety of jobs. 

PROS 

  • Patented cooling system
  • Lightweight and portable
  • Powerful gas engine
  • Low maintenance
  • Low fuel consumption

CONS 

  • Not good for heavy-duty jobs

2. HP DAVV High Pressure Air Compressor:

This is a high pressure air compressor which is very suitable for filling scuba tanks and paintball tanks. It is equipped with four high pressure cylinders delivering  a maximum pressure of 4500 PSI and a maximum flow rate of 3.5 CFM. It runs on a Honda GX gasoline engine with 5.5 horsepower. 

It is equipped with an intake filter, pump, belt, starter, frame, isolator, safety valve, oil separator and filter, pressure gauge, pressure switch, and an air cooler.

The HPDAVV features a display unit which shows you the pressure level. It also has buttons which make it easier to adjust settings. The unit also has indicators which show PSI, MPA, KG among others. 

It has buttons which allow you to turn the unit on/off and other buttons which allow you to set limits for the pressure so that you don’t go too high or too low when operating it. There’s also a button for cooling the unit and a screen which shows the temperature of the water.

PROS

  • User friendly
  • Cooling system
  • Easy to fill
  • Powerful engine
  • Good airflow
  • Good pressure level

CONS 

  • Not pocket friendly

3. Makita AC310H High-Pressure Air Compressor:

This unit is specifically engineered to run high pressure and conventional nailers. It weighs 79.4 pounds with a 1.6 gallon capacity and has 2.5 running horsepower.

With a maximum air pressure of 400 PSI, you can work on any demanding pneumatic nailer.

The AC310H operates quietly and runs on a four-pole induction motor which operates at 1720 RPM for a great displacement at a low RPM.

It is equipped with four couplers. Two couplers are for conventional nailers and they keep an air pressure of 90 PSI at 3.6 CFM. The other two couplers are for high pressure nailers and they keep an air pressure of 300 PSI at 3.7 CFM.  

When used at the highest, its bottom ensures that it does not vibrate at all. You can easily transport the unit because of its frame and tubes. It is easy to maintain as it uses an oil-free pump.

It has a one year warranty.

PROS 

  • East maintenance
  • Noiseless operation
  • Four couplers
  • 1 year warranty
  • Easy to operate
  • Uses a low RPM
  • Does not vibrate

CONS 

  • Sometimes quick connect fittings are not of the right size.

4.  Industrial Air 30-Gallon Belt Driven Air compressor:

This is a dual voltage air compressor which runs on the domestic 120 volts and can run on 240 volts with some adjustments. 

It weighs 190 pounds and has an induction motor which produces a maximum air pressure of 155 PSI. It has a performance of 90 PSI at 5.7 CFM. It has a 30-gallon tank capacity and produces 1.9 horsepower. 

It is easy to move this unit around as it comes with pneumatic wheels for transportation. You don’t need to worry about the unit getting too hot while in use because it comes with a twin-cylinder pump with an aluminum head and valve plate which ensures the heat is quickly gotten rid of. 

It is a user-friendly unit with easy-to-use controls. There is a gauge which allows the user to check the tank and working pressure, a switch to turn the unit on or off and controls to set the regulator. 

PROS

  • Easy to operate
  • Dual voltage
  • Pocket friendly
  • Noiseless operation
  • Good performance

CONS

  • Horsepower is not impressive

5. Ingersoll Rand SS5 5HP 60-Gallon Single Stage Air Compressor:

This is an air compressor with a 60-gallon tank capacity. It has an airflow of 18.1 CFM and a 100% duty cycle. This unit can be plugged into any domestic outlet as it uses 30 amps and 230 volts. 

It is the ideal unit for heavy duty projects as it has a powerful 5 horsepower and is a single stage air compressor which means a single stroke can compress air sucked into the pressure to fill up the tires. 

To counter the risk of overloading, it comes with a manual thermal overload protection which sits the power in case there is the danger of overloading.

The unit is user friendly and automatic. To operate, it has a start/stop switch which is all you need. It comes ready-to-use out of the box and can be used in enclosed spaces.

When changing the oil, you might have to change the filter as well. It is constructed with cast iron with an extended lifespan of up to 5000 hours of use.

PROS 

  • Suitable for use in enclosed spaces
  • 5000 hours of use
  • Automatic start/stop switch
  • User friendly controls
  • Ideal for heavy duty projects
  • Ready-to-use out of the box
  • Can be plugged into household outlets
  • Manual thermal overload protection

CONS 

  • Filter needs to be changed occasionally

6. Stealth 20 Gallon Ultra Quiet Air Compressor:

The Stealth 20 Gallon Ultra Quiet Air Compressor is the ideal unit for heavy duty projects because it comes with a powerful induction motor which can generate up to 1.8 horsepower. 

 It can also be used for other projects which are not heavy duty like inflating paint sprayers, cleaning tools and drills. 

It has a flow rate of 6 CFM at 40 PSI and 5 CFM at 90 PSI with a peak of 150 PSI. This PSI diversity makes it easy for the unit to support the type project you work on.

It has a compact design and so does not take up much space. It weighs 130 pounds and comes with a reinforced rubber grip, a 6-foot cord and tyres to make it easy to carry around. 

It operates super quietly and is probably the quietest air compressor on the market with a long life cycle of 1000 hours and a 20-gallon tank capacity which means you’ll work for a long time before needing a refill.

Its lifetime warranty makes it possible for you to go for a repair whenever the need be.

PROS

  • Lifetime warranty
  • 1000 hours life cycle
  • Portable
  • Compact design
  • Super quiet operation
  • Supports a variety of projects
  • Powerful induction motor
  • Diverse pressure level
  • Good tank capacity

CONS 

  •  Durability of tyres is not impressive

7. Dewalt DXCMLA1983054 30-gallon Portable Air Compressor:

This is a unit with a 30-gallon capacity and a powerful induction motor which generates 1.9 horsepower. 

It is a 120 volt unit but with some adjustments, it can be converted to support 240 volts. It has airflow rates of 7 CFM at 40 PSI and 5.7 CFM at 90 PSI with a peak of 155 PSI. 

It is a single-stage unit and is oil-free which makes it a low maintenance unit. It has a twin-cylinder patented pump, an aluminum head, a totally stable cylinder body made of cast iron and valve plates which help it dissipate heat faster to prolong its service life. Its internal parts and bolts are lubricated to extend its lifespan.

It is user-friendly with an on/off switch, pressure regulator, tank and tool pressure gauges and a quick-connect air outlet. 

For maximum portability, pneumatic tyres are attached to it 

PROS

  • User-friendly
  • Portable
  • Good airflow rate
  • Dual voltage
  • Powerful induction motor
  • Twin cylinder pump
  • Lubricated inner parts and bolts

CONS 

  • Takes a while to get accustomed to using it

How To Choose The Best  Air Compressor Under  $1,000

When purchasing an air compressor under $1,000 , there are several factors to consider. We cover the most important below. To enable you to make the best purchasing decision, you have to read them thoroughly as they help you analyze the products. 

  1. Power Source

Air compressors basically come in two power source models- Gas and electricity powered.  

Gas powered air compressors rely on gasoline as their only source of power. Thus, once the tank is filled with gas, it will automatically power up the air compressor. 

This type of air compressor is suitable for working in secluded sites that have less electrical sources. With this type of air compressor,  you don’t have to look out for power sources in the work site. 

Another important thing is, they are usually used for outdoor purposes as the fuel combustion can release toxic fumes which can be very harmful if inhaled for a long time. 

However, with electrical air compressors,  they have to be plugged into electrical outlets.   Unlike the gas modules,  they have a continuous power supply to help them run properly. They will be more efficient if the site has usable outlets around. 

In terms of weight , they are light and this is mainly because they don’t have a tank holding fuel. This doesn’t restrict them from completing the tasks. 

They are quite affordable and convenient. You have to consider both options and choose which power type is most suitable for you. 

  1.  Air Compressor Type

There are two types of air compressors. These are the two stage and single stage models. The handling of air these air compressors are basically the same.  The only difference is the process for connections pressing the air inside the cylinder. 

For example,  in a single stage air compressor,  air is compressed and then trapped in a single stroke. The air is stored inside the tank. However with the two stage air compressor, the air goes through another stroke before storing into a second piston. 

Two stage models are very powerful when compared to single-stage compressors.  This identified means a two-stage air compressor is the best choice for construction needs. It’s important to note that if your pneumatic tools have a small amount of power, then a single stage air compressor is very suitable.  

Compared to single stage air compressors, two stage air compressors can compress air to higher pressure (PSI). This means they can store more air without necessarily generating heat whilst increasing the compressor life and reducing wear.

3.  Airflow Amount

The airflow amount simply refers to how quick the air compressor can fill up the tank and supply the air. It’s important to note that this is usually represented in CFM (cubic feet per minute). 

If you are going to use tools on a continuous basis with an average CFM rating,  you have to note that pneumatic tools have different levels of air flow rates to run them properly.  To get the proper CFM rating,  you should multiply the average number by 4 to get the right requirement of the suitable continuous CFM. 

You should also consider the maximum CFM rating of all tools that you have to use at a time. 

4. Horsepower

Although horsepower doesn’t directly impact the performance of the air compressor delivery, it is an important factor to really consider while purchasing a 30 gallon air compressor. 

Single stage air compressors range from 1 to 14 HP but for two stage air compressors, 1 to 18 HP is good enough. 

5. PSI

PSI is what enables you to decide which is better between a single stage or two stage air compressor.  You should always check what PSI is required for your requirements for the air tool’s specifications. 

It is advisable to go for a model with a minimum of 90 PSI rating.  However, it’s more  important if the highest rated air tool you use is a blow gun with 2.5 CFM at 90 PSI. In this case, you should go for a model with a minimum of 90 PSI rating. 

FREQUENTLY ASKED QUESTIONS 

Oil-less air compressors or oil-lubed ones. Which is better?

Most oil-less air compressors generate lower CFM and PSI ratings while the oil- lubed ones are more efficient and usually require very little maintenance. 

Is a 2 stage air compressor worth it?

Yes. This is because they produce higher air power, which mostly makes them a better option for larger-scale operations and continuous applications. 

It’s also important to note that they cost a lot more and this makes them better suited for factories and workshops than for domestic use. 

CONCLUSION 

Congratulations on making it this far.  We hope this article serves as a guide for you when it comes to purchasing the best air compressors under  $1,000. 

Leave a Comment

Your email address will not be published. Required fields are marked *